The Carbon+ EMF Harmonizer Chip is a small round anti-radiation chip made with our proprietary dual-protection technology. Just stick it on and it works to neutralize harmful radiation coming from the most powerful EMF-emitting devices you use every day: cell phones (including 5G enabled devices), WiFi routers, WiFi extenders, induction cooktops, laptops, tablets, smart home hubs, microwave ovens, and more.

• Lightweight, scratch-resistant, energized carbon
• Thin and discreet 1.2” diameter with optional adhesive backing
• Can be removed and reused on another device 

Simply use one or two chips depending on the EMF-emitter you want to neutralize:

Cell phone - 1

Laptop - 1

iPad / Tablet - 1

Wireless speakers, TVs, small appliances, etc. - 1

Baby monitor - 1 on each side

WiFi router - 2

WiFi extender - 2 for each extender

Microwave - 2

Induction cooktop - 2

Smart meter - 2

Smart home hub - 2

• Neutralizes the negative health effects of all forms of EMF and RF radiation coming from cell phones (including 5G enabled devices), Wi-Fi routers, Wi-Fi extenders, laptops, iPads, smart meters, microwaves, baby monitors, and more
• Proven to work by third-party research studies
• Can be removed and reused on another device 

Cell phone

• use 1 per phone
• Wedge it method: Place the chip between your cell phone and case with the face of the chip facing out from the phone near the bottom center. Place cover on phone - the chip is now wedged between the phone and the case. This makes it easy to move the chip to a new cell phone in the future. 
• Stick it method: Remove the adhesive backing and stick the chip on the back of your cell phone near the bottom center. You can also attach it with tape which may allow you to more easily remove and repurpose it.
• Place the chip towards the bottom center to prevent interfering with wireless charging stations.
• The phone case will not interfere with the effectiveness of the Carbon+ EMF Harmonizer Chip.

Laptop, tablet, computer, monitor, Smart TV, small appliance, and wireless speaker:

• use 1 per device
• Attach the Carbon+ EMF Harmonizer Chip to your wireless device by removing the adhesive backing on the chip and placing the chip in any location on the device. It's not important whether the chip is on the top, bottom, side, etc., as long as it's on the device itself.
• If you plan on reusing the chip on a different device, attaching it with tape is fine and may allow you to more easily remove and repurpose it.
• If your wireless device has a case, for example on an iPad or tablet, it's ok for the chip to be covered by the case. It will not interfere with the effectiveness of the Carbon+ EMF Harmonizer Chip.

WiFi router, WiFi extender, utility smart meter, induction cooktop, microwave oven, smart home hub:

• use 2 per device
• Attach the Carbon+ EMF Harmonizer Chips by removing the adhesive backing on the chips and placing them in an inconspicuous location on the device. 
• If you plan on reusing the chip on a different device, attaching it with tape is fine and may allow you to more easily remove and repurpose it.
• On a WiFi router, extender, or booster place two chips anywhere on the device - top, side, or bottom.
• On an induction cooktop place two chips on the front near the controls, or on the top in a corner.
• On a microwave oven place two chips anywhere on the top or side of the oven.
• On a utility smart meter, place two chips on a flat surface, ideally not on the glass. If the glass front is the only flat surface, then you may place it there.
• On a smart home hub place two chips on any flat surface on the main device - top, side, or bottom.

Q. Why do I need an EMF protection sticker for my cell phone?

Cell phones are one of the most common and most powerful emitters of EMF radiation. Your cell phone is emitting EMF radiation even when you're not using it. And when you are using it, the level of EMFs increases dramatically. Since most of us have our phone with us constantly, using an EMF anti-radiation sticker is an effective way to shield your health from the negative consequences of EMF exposure.

Q. Why do I need EMF protection for my WiFi router?

WiFi router, and any such device that transmits a WiFi signal (WiFi boosters, extenders, modems, etc.) is a powerful emitter of EMF radiation. These and your cell phone are generally the most powerful EMF devices around you.

Q. Is the Carbon+ Harmonizer Chip an EMF radiation blocker sticker?

No, the Carbon+ EMF Harmonizer Chip does not block EMFs. Instead, it works better than blocking! The chip neutralizes the electromagnetic radiation coming from the device it's attached to. And in doing so, helps shield your health from the damaging effects of EMF exposure. A common misperception is that blocking electromagnetic radiation is possible. In fact, It's not possible for an EMF protection sticker to block electromagnetic radiation. The only real solution is neutralizing the radiation and it's why our chip is the only "EMF shield" that works. Yes, it IS an EMF anti radiation sticker because it protects you from radiation coming from WiFi or cell phones, but no, it is NOT a radiation blocker sticker. This is good news because your cell phone, router, etc. will continue to function normally. If the EMFs were blocked your devices would no longer work properly. This also explains why the anti-radiation effect cannot be measured with an EMF meter. The effects are best measured with physiological tests of your health parameters when using it. See our research here.